Blue Belt to Furnace Ratio (2024)

FAQs

What is the ratio of furnace to blue belt? ›

Using Stone Furnaces, and for smelting Copper, Iron, and Stone you need 48 (24 per side) to completely saturate a Yellow Belt, 96 (48 per side) for a Red Belt, and 140 (70 per side) for a Blue Belt: Pretty simple right?

24 stone furnaces are enough to fill half a yellow belt with iron plates. So to saturate the belt, 24 stone furnaces each side.

Re: Confused over ore-to-plates ratio

For Steel Furnaces (craft speed 2) you need 24/48/72 furnaces to turn a full belt of ore into a full belt of plate. Electric Furnaces are really there for when you are going to start using modules and beacons.

The way to go is to establish two furnace columns facing each other's back (stone or steel) with a tile gap for expansion for every furnace. Later in the game, the gap would be helpful for an electric furnace upgrade (3x3 tile).

As I have heard different black belts say, not more than 10–15% of the jiu-jitsu practitioners get to a blue belt level. If you do, bravo. But sadly, most people quit after getting a blue belt. Only about 3% of the practitioners reach the purple belt.

When you are hear loud hissing or squealing sounds coming from your furnace, this is a sign of a loose fan belt. Old, worn out, and overstressed fan belts can also cause a rubbery, burning smell. If this is the case, turn off your system and call a professional technician right away.

Ratio is 2 furnaces to 1 drill. So 8 furnaces would stop the ore from backing up with 4 drills.

If it takes 27 drills to saturate a belt, few people will bother concocting a way to have that odd-drill-out alternate belt lanes.

Some numbers to keep in mind, a yellow belt is capable of transporting 15 items per second (7.5 per side), red belts are twice that (30 per second) and blue belts are three times that (45 per second).

The current optimal ratio is 1 offshore pump to 20 boilers to 40 steam engines. Using steam engines for power does not produce pollution, however using boilers to heat up the water does.

What is the best oil ratio Factorio? ›

For producing petroleum gas, the optimal advanced oil processing ratio is 20:5:17 (advanced oil processing : heavy oil cracking : light oil cracking), and 8:2:7 is close enough. Using coal liquefaction, the ratio is 60:39:55 (coal liquefaction : heavy oil cracking : light oil cracking), and 12:8:11 is close enough.

A furnace operates at 2,400° F flue gas temperature. The optimum ratio is 10% excess air (2.1% O2 in flue gases), but tests show an actual ratio of 25% excess air (4.5% O2 in flue gases).

If it takes 27 drills to saturate a belt, few people will bother concocting a way to have that odd-drill-out alternate belt lanes.

An index widely used in the blast furnace operator is the replacement rate (RR) defined as the amount of co*ke saved (kg / t hot metal) for each kg of coal injected by ton of hot metal.

It is released as heat. It is seen that 4.76 moles (1 mole of oxygen and 3.76 moles of nitrogen) of air are needed for the theoretical combustion of 1 mole of carbon.